Motives Why a Hot Water Tank Will Explode
With regards to having to perform servicing on ones water heater, it is a reasonably minimal maintenance home appliance. Even so, one necessary aspect of it should be checked out routinely. Hot Water Heater Repair Madison WI wishes to pass on this safety information regarding ones water heater today.
Extreme temperature when joined with tank deterioration inside the storage tank can result in an explosion. If the water temperature is less than 212 degrees Fahrenheit, one will be safe from an explosion, though there is a danger of scalding at that temperature. But, if the water temperature is above 212 degrees, water changes into steam, which will then expand to 1,700 times the space it occupies as water. This is when an explosion can occur.
Cautionary Indications of a Water Heater Explosion
The leading sign is if one goes to get hot water from a faucet and only steam comes out. Immediately shut off electric power if one owns an electric water heater. If one owns a gas hot water heater, shut off the gas valve on the water heater. After that, get in touch with us to come assess the situation.
Minimizing Potential Water Heater Dangers
The most crucial upkeep activity having a water heater is to check the pressure relief valve, also referred to as the T&P valve, on a usual schedule. This valve helps regulate the pressure buildup inside of the water storage tank to avoid a unsafe increase in temperature and overpressure.
Be careful, the water discharge from a T&P valve can be really hot. If you do not feel safe testing the valve let us know. Additionally, doing any sort of repairs to the valve should be undertaken by a specialized plumbing repair company.
How to Test the T&P Valve
Remove anything from around the spot around the overflow pipe and floor drain.
Raise the test handle for approximately 5 seconds or until the water runs clear.
Let go of the handle.
If the T&P valve keeps on running with water, lift the handle up and down quickly to get it to reseat itself. One may need to do this a couple of times. IF it has not been tested for a while, it might be difficult to raise it at first. Avoid using too much force, but might need to use just a little.
If the T&P valve continues to have water coming out, it ought to be replaced.
Other things to look for are corrosion on the stem of the valve. If there is any water leaking from the valve stem or out of the drain valve.
Interested in far more ideas? Have a look at our additional articles right here:
Water Heater Maintenance Infographic
Related T&P Valve Testing Videos
Mythbusters did a test of the potential dangers of hot water heater explosions here:
What the Experts Say
- The discharge from a T&P valve can be very hot. It is very important that all T&P valves be installed properly with a discharge line piped downward to an adequate drain to avoid property damage and to minimize possible human contact.
Pressure relief valves sometime develop a drip when opened for the first time in years. Try opening and closing it a few times to see if it will seat itself. If you have a large leak or the drip doesn’t stop on its own in a day or two, the valve will need to be replaced. Read more…
Check out some of our other water heater tips in our blog
Are you experiencing issues with stinky odors originating from the water originating from your water heater? It could happen in certain cases for a couple different reasons. Here is what Water Heater Repair Madison WI recommends...read more
An element about ones water heater of which a lot of Madison homeowners has quite possibly definitely not considered a lot concerning is the temperature setting. What exactly is the ideal temperature level for the hot water in ones family home? In this post Water...read more
We absolutely love the things we do here at Water Heater Repair Madison WI and look forward to assisting as many of our Madison neighborhood friends as possible. We will continue to include assistance on water heater maintenance right here in this blog too. We desire...read more